inVENTer® twin
inVENTer® twin is designed to ventilate dwellings as well as offices, schools and industrial halls. It is ideal for single room apartments such as in nursing homes, hospitals and hotel rooms.
2 in 1
inVENTer® twin consists of two telescopic tubes, with 2 heat accumulators and 2 ventilators combining features of 2 normal inVENTer® ventilators. While through one tube stale air is blown out, through the other one fresh air comes in. Specially designed inner and outer hoods prevent a mixing of the airstreams within the hoods.
This is the ultimate single room HRV-unit.
Prevent mould growth in high insulated houses
InVENTer® units consistently exchange stale, humid air for fresh, clean, room-temperated air.
Save Energy Costs
InVENTer® twin meets all the demands of the German Energy Saving Ordinance ("EnEV"). You save around 17,2 kWh/m2 heat-energy per year.
You can meet "Passivhaus"-low energy standards cost-efficiently and easily in connexion with other environmental installations, e.g. a heat pump.
inVENTer® twin consists of:
- 2 sqare tubes with sliding sleeve
- 2 cartridges with heat storage and ventilator
- round or square inner valve and dust filter
- stainless steel exterior hood (bright or white)
Accessories:
- Controller (ZR10 or ZR31)
- Cable (flat or round)
- optional: allergic filter, Sound-Insulation, ...
The inVENTer® system disappears inside the wall
Easy to mount
It is so easy to mount inVENTer® twin. All you need is an opening in the outwall. Except the outer hood everything is to mount inside.
Wall mounting: |
|
|
 |
 |
|
Specifications:
| DIBT-certification |
Z-51.3-198 |
|
| Airflow m³/h | 13 - 40 |
|
| Heat Recovery | up to 0,86 (86%) |
|
| Sound Level (dB(A)) [@1m] |
19 - 40 | |
| Energy Consumption |
2 - 6 W | |
| Range of Temperature | -20 to +50° C | |
|
Wall opening in mm |
150 x 270 | |
Subject to technical changes.
Downloads:
|
|
|
