inVENTer® 14V (square)
inVENTer® 14V (square casing) - ideal for use in retrofits - is designed to ventilate dwellings as well as offices, schools and industrie halls.
Prevent mould growth in high insulated houses
InVENTer® units consistently exchange stale, humid air for fresh, clean, room-temperated air.
Save Energy Costs
InVENTer® 14V meets all the demands of the German Energy Saving Ordinance ("EnEV"). You save around 17,2 kWh/m² heat-energy per year.
You can meet "Passivhaus"-low energy standards cost-efficiently and easily in connexion with more environmental installations, e.g. a heat pump.
inVENTer® 14V consists of:
- square casing (fixed length with optional sliding sleeve)
- cartridge with heat storage and ventilator
- round or square inner valve and dust filter
- stainless steel exterior hood (satin or white)
Accessories:
- Controller (ZR10 or ZR31)
- Cable (flat or round)
- optional: allergic filter, Sound-Insulation, ...
Easy to mount
It is so easy to mount inVENTer® 14V. All you need is an opening in the outwall. Except the outer hood everything is to mount inside.
 |
|
|
Specifications:
Recommended to use in pairs
| Building inspection approval | Z-51.3-156 | |
| Airflow in m3/h | 13,6 - 29 | |
| Exhaust airflow m³/h | 27,2 - 58 | |
| Heat Recovery | up to 0,91 (91%) | |
| Sound Level dB(A) [@1m] | 19 - 41 | |
| Airflow-based power supply in W/(m³/h) | 0,11 | |
| Energy Consumption W/h | 1 - 3 W | |
| Range of Temperature in °C | -20 to +50° C | |
|
Wall opening in mm |
210 x 210 | |
| Wall thickness in mm | 240 - 460 (+tube extensions for thicker walls) | |
Subject to technical changes.
Downloads:
installation guide inVENTer 14
service + maintenance inVENTer
|
|
|
